How do I Drain an Intex Easy Set Pool?

How do I Drain an Intex Easy Set Pool?

Intex Easy Set Pool

Intex Easy Set Pool

An easy way to drain an Intex Easy Set Pool is to take a garden hose and disconnect it from the tap. Remove the cap from the drain valve on the outside of the pool wall.

Attach the female end of the hose to hose valve. Place the end of the hose in an area where the water can be safely drained. A lower point then the pool water level like down a hill would be best if possible.

Remove the drain plug on the inside of the pool. Water will start to drain immediately.

If you still have water left in the pool because the water is below the drain valve, you may have to use a sump pump or a shop vac to remove the remaining water.

Disconnect hose adapter when finished. Replace drain plug on the inside of pool for storage. Replace drain cap on outside of pool.

Be sure pool liner is completely clean and dry before long-term storage.  You can also sprinkle the inside of the pool with baby powder to add a nice smell and get rid of the last bit of moisture if you are planning on storing your pool for the winter.

Storing Your Intex Easy Set Pool

Store the pool in a garage or some place out of the cold and the snow. If you are careful with the take down, storage, and re-assembly your pool should last many years, probably longer than if you left it up year round.

If you are draining your Intex Easy Set Pool because it was lopsided, make sure you level the ground completely before you refill your Intex Easy Set Pool or you will have the same problem again.

 

How Long Should I Run an Intex Filter Pump?

How Long Should I Run an Intex Filter Pump?

Intex Filter Pump

Intex Filter Pump

It is important to run your Intex Filter Pump long enough to allow the entire contents of the pool to run through the filter once each day. This will help to insure that you have clean and sanitary pool water.  Depending on your personal circumstances, such as heavy pool use, type of water and weather, you may have to run your filter for a longer period of time each day. However, you should not run the filter longer than 8 hours per day.

If you don’t allow all your pool water to be filtered daily you may run into water quality problems down the road. What you are saving in electricity by running the Intex Filter Pump for less time, will cost you much more in chemicals if you have to treat a problem. It will not save you money in the long run.  It may even end up costing you more because pool chemicals are expensive. Not to mention the time it takes to possibly empty, clean, and refill the pool.

To figure out how long to run your pump, look at the instructions that came with your pool.  The instructions should tell your how many gallons of water your pool holds and also how many GPM or Gallons Per Minute that go through your pump.  Take the number of gallons your pool holds and divide it by the Gallons Per Minute that go through your pump.  This will give you total minutes.  Divide the total minutes by 60 and this will give you’re the number of hours necessary to run the entire contents of your pool through your filter one time.

Your Intex Pool Filter should be put on a timer to allow it to be turned on and off automatically.  This will also insure that your filter is running for the proper amount of time each day. If you want a clean and sparkling pool for your family to enjoy then make sure you run your Intex Pool Filter for the correct amount of time each day.

 

Intex Pool Chemicals: Why They are Important

Intex Pool Chemicals: Why They are Important

Intex Pool Chemicals

Intex Pool Chemicals

Why are your Intex pool chemicals so important to your enjoyment of your Intex pool?  There is nothing so inviting as a sparkling clean pool to enjoy on a hot summer day.  To keep your pool sparkling clean and inviting you must use pool chemicals.  Keeping your pool sparkling clean can be easy and inexpensive with the right knowledge and equipment.

The easiest and least expensive chemical for maintaining a sparkling clean pool is chlorine.  Chlorine comes in a number of forms.  Which form is right for you and your pool? One of the easiest and least expensive is purchasing an “Above Ground Pool Chemical Maintenance Kit”.

The are two different sizes of kits.  One for pools that are 12′ and under and one for pools that are 13′ and larger. Each of these kits comes with all of the basics needed for proper maintenance of your Intex pool chemicals.   The kits contain a bottle of pH minus, a bottle of pH plus, chlorinating granules, algaecide and clarifier, and a water test kit.

How do you know how much Intex Pool Chemicals you need?

How do you know how much and which chemicals you need? You use the water test kit that comes with the “Above Ground Chemical Maintenance Kit” to measure the chlorine levels and pH levels.  Based on the results you get from your water test kit, you adjust the chlorine and pH levels using the chemicals that are included with the “Above Ground Pool Chemical Maintenance Kit”.

Should you ever develope an algae problem then you will add the algaecide and clarifier that comes included with the “Above Ground Pool Chemical Maintenance kit”.  However, if you check your chlorine and pH levels daily and keep them at the proper levels you will greatly decrease the chances of  getting out of control algae in you Intex above ground pool.  A few minutes of daily testing can save you from having to deal with the dreaded algae. It is well worth the few minutes you need every day to check your Intex pool chemicals.

When should check you Intex pool chemicals.  The best time to check and add the pool chemicals is in the evening after you have finished swimming for the day.  That way the chemicals will dissolve and have time to spread out into the whole pool and chlorine will stay in the water overnight.

After a couple of weeks of measuring and adding chemicals to your pool you will have an idea of how much and what chemicals your pool needs on a daily basis.   Just remember to test your  pool chemicals daily using the water test kit that comes with your “Above Ground Pool Maintenance Kit”. Then based on the results of the water test add the necessary amount of chlorine granules and pH chemicals to keep your Intex pool chemicals at their proper levels.

With just a few minutes of daily maintenance you can have a sparkling clean pool to enjoy all summer long for you, your family and friends.

Why should you purchase Intex Pool Chemicals from Amazon?

They sell just about anything you need at great discounts all in one place. All items have a full description of benefits and features along with photos. You can read the helpful customer reviews to get information on the products usefulness, durability and functionality. Refunds and returns are very easy. Also buying from Amazon is completely secure and all products come with warranties from manufacturer, or seller, or both.

(links on this page are sponsored affiliate links, the owner is not a bonafide user of this product and receives commission for sales made. The info about Intex pool chemicals on this site is the webmasters opinion only and should not be taken as professional advice.)